The Ogee stopend is designed for use at the end of a run of guttering and can be used in conjunction with any of the Ogee range of gutter fittings. The external stop end is bigger than the piece it connects to and sits over the plain end and the stop end internally locates inside the socket of the gutter or fitting.
The stop end forms part of our Ogee cast iron gutters range and is available as either an internal or external fitting. The external stop end is designed for use on a plain end of guttering whereas the internal fits inside a socket. This fitting is used to finish off the end of a run of guttering to stop water from escaping.
The Ogee stop end is supplied as internal and external rather than left or right hand.
Sizes for both the internal & external stop end fittings are:
4″ = 50mm
4.5″ = 50mm
5″ = 50mm
The cast iron Ogee stopend is supplied in either a grey primer or gloss black painted finish.
Whilst more commonly used on Heritage projects the cast iron Ogee profile can enhance the appearance of both traditional and contemporary projects whilst providing significant benefits over other rainwater systems. Cast iron guttering, pipes and hopper heads offer unrivalled strength, durability, low operational noise levels, environmental benefits and a lifespan that makes the installation of these products a once-in-a-generation event.
Our Victorian Ogee cast iron gutter is a stylish profile which has a sculpted front. The Ogee cast iron gutter profile was a popular design which was regularly used in the Victorian era. As such, this shaped cast iron gutter profile is often found on traditional and Listed buildings as well as in conservation areas.
The Common Ogee profile of the gutter would usually be jointed using a silicone sealant, bolts, nuts and washers (see our gutter and pipe accessories section). A significant number of Common Ogee gutter installations will be fitted to a fascia board directly through the rear of the gutter profile. Our cast iron Common Ogee has three fixing positions across each 6’ (1820mm) length of gutter. Alternative means of fixing include our Ogee fascia brackets, Ogee top or side fixed rafter brackets or our Ogee rise and fall adjustable brackets.
